Aquadrive Catalogue 2020

Moduline B10 10 CVB 10.10 104,5 211 M 10 150 ± 12 Adapter Flange 200 145 100 L= min. 240 ± 12 Ø 94 CV 10 Custom-length CV 10 driveshaft is available in lengths from 150 mm (from 240 mm with tubeshaft design). Maximum length depends on shaft rpm. Application examples Note: Above rating examples are based on optimum conditions with 2° for each CV joints. In case a CV joint will run at an angle greater than 2°, the max permitted power must be reduced (normally by 8-9% for each degree over 2°). The maximum allowable joint angle is 4-8° depending on shaft rpm. Propeller shaft options B10 standard version accepts following propeller shaft ØA: Oversize version with external clamp mechanics suits shaft diameters: All B10 systems are also available with flange coupling to suit standard BW 5 " propeller flange. Please contact our technical department to assist you in selecting a suitable Aquadrive system for your application. Max. static torque (ØA = 1 ") 1300 Nm / 969 lbft Max. propeller shaft revolutions 4000 rpm Max. continuous propeller thrust 11 kN / 2475 lbf Rated power kw (HP) Crankshaft rpm Gearbox ratio Planing boat 62 (85) 3800 2.0 : 1 Sailing boat 55 (75) 3800 2.6 : 1 Displacement motorboat 40 (55) 2600 3.0 : 1 ¾" 20 mm 22 mm ⅞ " 25 mm 1 " 1 ⅛ " 30 mm 1 ¼ " 32 mm 35 mm 1 ½ " 40 mm 1 ¾ " 45 mm 50 mm 2 "

RkJQdWJsaXNoZXIy NjgxNzc4