Aquadrive Catalogue 2020

Moduline B10 11 CVB 15.10 232 106 170 ± 16 M 10 Adapter Flange 145 200 111.5 L= min 270 ± 16 Ø 108 Custom-length CV 15 driveshaft is available in lengths from 170 mm (from 270 mm with tubeshaft design). Maximum length depends on shaft rpm. CV 15 Application examples Propeller shaft options B10 standard version accepts following propeller shaft ØA: Oversize version with external clamp mechanics suits shaft diameters: All B10 systems are also available with flange coupling to suit standard BW 5 " propeller flange. Please contact our technical department to assist you in selecting a suitable Aquadrive system for your application. Note: Above rating examples are based on optimum conditions with 2° for each CV joints. In case a CV joint will run at an angle greater than 2°, the max. permitted power must be reduced (normally by 8-9% for each degree over 2°). The maximum allowable joint angle is 4-8° depending on shaft rpm. Max. static torque (ØA = 1 ¼") 1625 Nm / 1200 lbft Max. propeller shaft revolutions 4000 rpm Max. continuous propeller thrust 11 kN / 2475 lbf Rated power kw (HP) Crankshaft rpm Gearbox ratio Planing boat 114 (155) 3800 2.0 : 1 Semi-dis- placement motorboat 96 (130) 3300 2.2 : 1 Sailing boat 85 (115) 3300 2.6 : 1 Displacement motorboat 66 (90) 2600 3.0 : 1 ¾" 20 mm 22 mm ⅞ " 25 mm 1 " 1 ⅛ " 30 mm 1 ¼ " 32 mm 35 mm 1 ½ " 40 mm 1 ¾ " 45 mm 50 mm 2 "