Aquadrive Catalogue 2020

Moduline B30 15 Adapter ØA 299 245 ± 25 170 M 16 Flange 80 160 230 236 283 360 155,5 L=min340±25 Ø148 Ø70x4 CVB 30.30 CV 30 ØA 40 mm 1 ¾ " 45 mm 50 mm 2 " 2 ¼ " 60 mm 2 ½ " 65 mm 70 mm Custom-length CV 30 driveshaft is available in lengths from 245 mm (from 340 mm with tubeshaft design). Maximum length depends on shaft rpm. Application examples Propeller shaft options B30 standard version accepts following propeller shaft sizes: All B30 systems are also available with flange coupling. Please contact our technical department to assist you in selecting a suitable Aquadrive system for your application. Note: Above rating examples are based on optimum conditions with 2° for each CV joints. In case a CV joint will run at an angle greater than 2°, the max. permitted power must be reduced (normally by 8-9% for each degree over 2°). The maximum allowable joint angle is 5-8° depending on shaft rpm. Max. static torque (ØA = 65 mm) 3000 Nm / 2215 lbft Max. propeller shaft revolutions 1700 rpm Max. continuous propeller thrust 21 kN / 4725 lbf Rated power kw (HP) Crankshaft rpm Gearbox ratio Displacement boat 140 (190) 2600 3 : 1 Planing boat 180 (244) 3000 2 : 1