Aquadrive Catalogue 2020

Moduline B30 16 Adapter Flange ØA 354 300 ± 25 170 M 16 80 160 230 236 283 360 155,5 L= min 420 ± 25 Ø180 Ø90x4 CVB 32.30 Custom-length CV 32 driveshaft is available in lengths from 300 mm (from 420 mm with tubeshaft design). Maximum length depends on shaft rpm. CV 32 Application examples Note: Above rating examples are based on optimum conditions with 2° for each CV joints. In case a CV joint will run at an angle greater than 2°, the max. permitted power must be reduced (normally by 8-9% for each degree over 2°). The maximum allowable joint angle is 5-8° depending on shaft rpm. Propeller shaft options B30 standard version accepts following propeller shaft sizes: All B30 systems are also available with flange coupling. Please contact our technical department to assist you in selecting a suitable Aquadrive system for your application. Max. static torque (ØA = 65 mm) 3000 Nm / 2215 lbft Max. propeller shaft revolutions 1700 rpm Max. continuous propeller thrust 21 kN / 4725 lbf Rated power kw (HP) Crankshaft rpm Gearbox ratio Displacement boat 195 (265) 2600 3 : 1 Planing boat 270 (365) 3000 2 : 1 ØA 40 mm 1 ¾ " 45 mm 50 mm 2 " 2 ¼ " 60 mm 2 ½ " 65 mm 70 mm